SKU TRM11332

Katina – Bubble Gum Opal

In stockProfessional use only

€ 110.00

Studio pricing available — for verified piercers

  • F136 · DFARS · France
  • Italian design
  • Based in Barcelona

Short description & details

Katina Bubble Gum Opal: a 16G, 8 mm titanium clicker mixing bubble gum opal ovals and pink cubic zirconia around a white row.

Hinged ring (clicker)
Material: Titanium ASTM F-136
Gauge: 1.2 mm (16G)
Diameter: 8 mm
Stones: Opal, pink & white cubic zirconia

In stock

Verified piercer?Register for studio pricing →

Free worldwide shipping on orders over €350 · DHL Express · Lifetime warranty

  • Autoclave Safe
  • Lifetime Warranty
  • DHL Express
  • Professional Only

Professional specifications

Additional information

Material

Titanium ASTM F-136

Metal colour

Natural

Gauge

16G · 1.2 mm

Diameter

8mm

Stone

Cubic Zirconia, Opal

Stone colour

Pink, White

Collection

Katina

Description

  • Type: Hinged ring (clicker)
  • Material: Titanium ASTM F-136
  • Finish: Polished
  • Gauge: 1.2 mm (16G)
  • Diameter: 8 mm
  • Stones: Bubble gum opal ovals and pink cubic zirconia accents with a double row of white cubic zirconia
  • Setting: Front-facing, set across the lower half
  • Fitting: Hinged segment in the plain upper half
  • Sold as: Single ring, complete piece

The Katina design

Katina by Tremun is a hinged ring (clicker) in titanium ASTM F-136, 1.2 mm (16G) thick with an 8 mm diameter. The upper half is plain polished titanium with the hinged segment; the lower half carries a double row of small white cubic zirconia framed by a fringe of larger shaped accent stones (marquise, pear or oval cuts, depending on the colourway). Katina – Bubble Gum Opal pairs bubble gum opal ovals and pink cubic zirconia accents with white cubic zirconia. Each ring is sold as a single piece to registered professional piercers and studios through Tremun’s B2B wholesale shop, shipped from Barcelona by DHL Express with no minimum order.

This colourway mixes two textures in the fringe: milky bubble gum opal ovals with a soft pink glow sit at the centre and on each lower side, and pairs of pink cubic zirconia marquise cuts fill the positions between them. The opal brings a calm, luminous surface; the pink stones bring flash. It is the most layered Katina, and the one that rewards a close look.

Commonly worn in

Katina is a front-facing hinged ring: the stones sit on the lower half and face forward, so the design reads straight on.

  • Septum: the hinge sits inside, and the stone arc rests below the nose facing out.
  • Daith: the stone fringe sits low and faces out of the ear; 8 mm is a classic daith size.
  • Helix and lobe: the stone arc wraps the edge and shows from the side.

The accent stones extend past the ring’s outer edge, so on a small daith or a crowded ear check the space around the piercing before fitting. Made for healed piercings.

Why studios stock it

Katina gives you one silhouette in seven colourways at a single spec, 1.2 mm (16G) and 8 mm. Clients choose by colour without changing the fit conversation, and it sits alongside Eris and Asami at the same gauge and diameter, so a mixed hinged-ring tray needs no extra sizes.

Complete the tray: with every Katina at 16G and 8 mm, one row on a ring display shows the whole design and all its colourways at a glance.

Questions piercers ask

What size is Katina Bubble Gum Opal?

Katina Bubble Gum Opal is 1.2 mm (16G) with an 8 mm diameter. The accent fringe extends beyond the ring’s outer edge, so the piece looks wider than the ring itself; allow for it on a small daith.

Which way do the stones face?

Forward. The stones are set on the front of the lower half, which suits septum, daith, helix and lobe. The upper half is plain polished titanium with the hinged segment.

What colours are in the Katina Bubble Gum Opal fringe?

Pale, milky opal ovals with a soft lilac-pink glow sit at the centre and on each lower side, with pairs of pink cubic zirconia marquise cuts between them, all over a white cubic zirconia double row.

Is there a minimum order, and is the titanium certified?

There is no minimum order: order one Katina or the full colour range for your display. Mill certificates for our titanium are published on our certificates page and available on request.

Materials and documentation

  • Titanium ASTM F-136 (Ti-6Al-4V ELI), sourced in France. DFARS compliant.
  • Mill certificates for our titanium are published on our certificates page and available on request.
  • Stones: opal, pink cubic zirconia and white cubic zirconia.
  • Lifetime warranty against manufacturing defects; normal wear and damage from use are not covered.

Product information

Manufacturer: TREMUN PIERCING, S.L., Calle Rocafort 67, 08015 Barcelona, Spain · [email protected]. Product identifier: SKU TRM11332. For professional use: to be fitted by a trained piercer. Small parts: keep away from children.

Discover the collection

More Katina colourways: Katina White, Katina Pink, Katina Champagne, Katina Black. For a crown-style alternative at the same 16G and 8 mm, see Eris, or browse all titanium rings.

Shipped worldwide from Barcelona by DHL Express, free over €350 (VAT included). No minimum order.

Use context

Shipping & returns

Orders ship from Barcelona with DHL Express. Shipping is free worldwide on orders over €350.

Every piece is covered by the Tremun lifetime warranty. For returns and warranty claims, see our Terms & Conditions or contact us.

Certificates

Material composition certificateEnglish versionDownload
Material composition certificateSpanish versionDownload
Material composition certificateItalian versionDownload
Material composition certificateBatch certificateDownload

Discover more

Gold collection