SKU TRM11330

Katina – Black

Auf LagerNur für den professionellen Gebrauch

€ 100.00

Studiopreise verfügbar — für verifizierte Piercer

  • F136 · DFARS · France
  • Italienisches Design
  • Mit Sitz in Barcelona

Kurzbeschreibung & Details

Katina Black: a 16G, 8 mm titanium clicker with black and white cubic zirconia accents, a graphic piece for septum or helix.

Hinged ring (clicker)
Material: Titanium ASTM F-136
Stärke: 1,2 mm (16G)
Durchmesser: 8 mm
Stones: Black & white cubic zirconia

Vorrätig

Verifizierter Piercer?Für Studiopreise registrieren →

Free worldwide shipping on orders over €350 · DHL Express · Lifetime warranty

  • Sicher im Autoklaven
  • Lebenslange Garantie
  • DHL Express
  • Nur für Profis

Professionelle Spezifikationen

Zusätzliche Informationen

Material

Titanium ASTM F-136

Metallfarbe

Natur

Stärke

16G · 1.2 mm

Durchmesser

8mm

Stein

Kubischer Zirkoniumdioxid

Steinfarbe

Schwarz, Weiß

Kollektion

Katina

Beschreibung

  • Typ: Hinged ring (clicker)
  • Material: Titanium ASTM F-136
  • Oberfläche: Polished
  • Stärke: 1,2 mm (16G)
  • Durchmesser: 8 mm
  • Stones: Black and white cubic zirconia accents with a double row of white cubic zirconia
  • Fassung: Front-facing, set across the lower half
  • Fitting: Hinged segment in the plain upper half
  • Verkaufseinheit: Single ring, complete piece

The Katina design

Katina by Tremun is a hinged ring (clicker) in titanium ASTM F-136, 1.2 mm (16G) thick with an 8 mm diameter. The upper half is plain polished titanium with the hinged segment; the lower half carries a double row of small white cubic zirconia framed by a fringe of larger shaped accent stones (marquise, pear or oval cuts, depending on the colourway). Katina – Black pairs black cubic zirconia accents with white cubic zirconia. Each ring is sold as a single piece to registered professional piercers and studios through Tremun’s B2B wholesale shop, shipped from Barcelona by DHL Express with no minimum order.

Black alternates jet-black marquise cubic zirconia with clear white ones around the outer edge, so the fringe reads as a rhythm of dark and light rather than a single colour. It is the most graphic Katina: high contrast, a little edgy, and the colourway that sells to clients who usually avoid pastel or all-white pieces.

Typische Platzierungen

Katina is a front-facing hinged ring: the stones sit on the lower half and face forward, so the design reads straight on.

  • Septum: the hinge sits inside, and the stone arc rests below the nose facing out.
  • Daith: the stone fringe sits low and faces out of the ear; 8 mm is a classic daith size.
  • Helix and lobe: the stone arc wraps the edge and shows from the side.

The accent stones extend past the ring’s outer edge, so on a small daith or a crowded ear check the space around the piercing before fitting. Made for healed piercings.

Warum Studios es führen

Katina gives you one silhouette in seven colourways at a single spec, 1.2 mm (16G) and 8 mm. Clients choose by colour without changing the fit conversation, and it sits alongside Eris and Asami at the same gauge and diameter, so a mixed hinged-ring tray needs no extra sizes.

Complete the tray: with every Katina at 16G and 8 mm, one row on a ring display shows the whole design and all its colourways at a glance.

Häufige Fragen von Piercern

What size is Katina Black?

Katina Black is 1.2 mm (16G) with an 8 mm diameter. The accent fringe extends beyond the ring’s outer edge, so the piece looks wider than the ring itself; allow for it on a small daith.

Which way do the stones face?

Forward. The stones are set on the front of the lower half, which suits septum, daith, helix and lobe. The upper half is plain polished titanium with the hinged segment.

How is the black arranged on Katina Black?

Black marquise cubic zirconia alternate with white marquise cuts around the fringe, so the edge reads as a rhythm of dark and light over the white double row.

Is there a minimum order, and is the titanium certified?

There is no minimum order: order one Katina or the full colour range for your display. Mill certificates for our titanium are published on our Zertifikatsseite and available on request.

Material und Dokumentation

  • Titanium ASTM F-136 (Ti-6Al-4V ELI), sourced in France. DFARS compliant.
  • Mill certificates for our titanium are published on our Zertifikatsseite and available on request.
  • Stones: black and white cubic zirconia.
  • Lifetime warranty against manufacturing defects; normal wear and damage from use are not covered.

Product information

Manufacturer: TREMUN PIERCING, S.L., Calle Rocafort 67, 08015 Barcelona, Spain · [email protected]. Product identifier: SKU TRM11330. For professional use: to be fitted by a trained piercer. Small parts: keep away from children.

Kollektion entdecken

More Katina colourways: Katina White, Katina Pink, Katina Champagne. For a crown-style alternative at the same 16G and 8 mm, see Eris, or browse all titanium rings.

Shipped worldwide from Barcelona by DHL Express, free over €350 (VAT included). No minimum order.

Anwendung

Art.-Nr. TRM11330 Kategorien , , Schlagwörter , , , , , , , , , Marke:

Versand & Rückgabe

Orders ship from Barcelona with DHL Express. Shipping is free worldwide on orders over €350.

Für jedes Stück gilt die lebenslange Tremun-Garantie. Zu Rückgaben und Garantieansprüchen siehe unsere Allgemeine Geschäftsbedingungen oder kontaktieren Sie uns.

Bescheinigungen

Zertifikat zur MaterialzusammensetzungEnglische VersionHerunterladen
Zertifikat zur MaterialzusammensetzungSpanische VersionHerunterladen
Zertifikat zur MaterialzusammensetzungItalienische VersionHerunterladen
Zertifikat zur MaterialzusammensetzungChargenzertifikatHerunterladen

Mehr entdecken

Gold-Kollektion